4-axle 55-ton side-reversing dump semi-trailer suitable for the Malaysian market

Aug 19, 2026

Leave a message

2026-08-19163717533

Dimensions: 12500mm * 2600mm * 714mm + 200mm. Developed strictly in accordance with the new regulations of Malaysian trailers.
The total vehicle weight is approximately 9.8T; the height of the towing seat is 1300mm, with no height difference between the front and rear, ensuring better vehicle stability during operation.
Industry knowledge: The total length, width and height of export trailers need to match local road regulations. Exceeding the size limit will prevent them from being used on the road.
Industry explanation: When a side-reversing trailer is lifted to unload materials, the main beam has to bear huge torsional force. Ordinary steel is prone to twisting and deforming under long-term heavy load. T700 high-strength steel combines lightweight with strength, and is the mainstream material for heavy-duty side-reversing trailers in Southeast Asia. It reduces the vehicle's self-weight while ensuring structural safety under 55-ton load conditions.
The floor uses 3.0mm thick steel plate for overall flat welding, providing excellent wear resistance, suitable for handling sharp materials such as sand and gravel.

 

Box, columns and waterproof design (suitable for the rainy tropical environment of Malaysia)
The front guard plate is of reinforced structure, with 3mm steel plate lining, equipped with 4 plugs to resist the impact of loading and unloading materials.
The box panel adopts a right-side lifting structure, with 2.0mm thick steel plate formed into cross corrugations, the four sides are square tubes 50702.0mm, and the lower opening is specially designed with a waterproof edge, and the left side is welded and sealed.
Practical value: Malaysia has abundant rainfall, the waterproof edge can prevent rainwater from seeping into the trailer, avoiding water damage to the goods, and preventing the box from being eroded by rainwater during maritime transportation or outdoor parking.
Industry pain points: When unloading materials, the bottom plate of many side-reversing trailers is prone to being squeezed and damaging oil pipes. The elbow protection design is to solve this frequent fault point, reducing the maintenance cost for the fleet in the future; without an engine starter, the front quick connector is sealed, facilitating the matching of different tractor units.

2026-08-19163710085

 

Axle and suspension combination: Balancing heavy load and road adaptation
Axle: 13T axle × 4, axle tube wall thickness 11mm. The thick axle tube can resist fatigue under long-term heavy load, reducing the risk of axle breakage.
Suspension configuration: The first axle is equipped with an air suspension (can be raised), the last 3 axles have 8mm thick mechanical suspension.
Explanation: The first axle air suspension can be raised when passing over speed bumps or uneven road surfaces, reducing tire wear; the rear 3 axles have strong bearing capacity and are suitable for poor road conditions in Malaysian construction sites, balancing lightweight and heavy load capabilities, and are very practical suspension combinations for 4-axle side-reversing trailers in Southeast Asia.

Malaysia has a tropical climate with high temperatures and high salt spray. Ordinary paint is prone to rust and peeling. Customized models use baking paint technology instead of ordinary spray paint, with stronger paint adhesion, resistant to sun exposure, rain, and salt spray corrosion. Before shipping out to sea, the entire vehicle is sprayed with wax, the internal steel wires are fixed, and the tarpaulin is wrapped to resist salt spray erosion during the shipping process.

Two important reminders for purchasing export side-reversing semi-trailers:
Prioritize matching local regulations: Directly purchasing domestic standard models is prone to size and axle load non-compliance. After arrival at the port, it will be impossible to register and operate on the road. It is necessary to customize the size and axle type in accordance with the new regulations of the target country in advance.
Climate adaptation cannot be ignored: In tropical regions with heavy rainfall and high salt spray from the sea, it is essential to upgrade the anti-rust measures. Using high-strength steel combined with baking paint technology can significantly extend the service life of the trailer and reduce the maintenance costs in the long run.

2026-08-19163714213

 

 

Send Inquiry